If you get to a stain immediately, there’s a 99 percent chance you can remove it. The longer a stain reacts chemically with the carpeting, the harder it is to remove.
Try water first
Eighty percent of stains can be removed using plain tap water. To remove a stain, press a clean, dry, white cloth over the stain to absorb the spill. Repeat until the spill is absorbed. Then gently work water into the stain with a damp white towel and blot until the stain is gone. Change cloths when necessary. For a particularly stubborn spot, go to the online “spot solver” resource at The Carpet and Rug Institute (the carpet manufacturers’ trade organization) to find your stain and a suggested solution. Use a fan to dry the area if it’s very wet.
Blot—don’t rub or scrub
Scrubbing a stain will damage the fibers and create a fuzzy area. Always blot from the outer edge toward the center of the stain to avoid spreading the spot and creating a larger problem.
Work water gently into the spill and then blot with a dry cloth. Repeat until the stain is gone and all the water has been absorbed. If you’re patient, you’ll almost always be able to remove the stain.
On tough spots, try vinegar or club soda
If water alone doesn’t remove a stain, try a white vinegar and water solution (equal amounts) or club soda before trying stronger commercial cleaning products.
Test commercial products first
Some products can cause carpet to get dirty faster or damage the carpet’s color and texture. For a list of carpet manufacturer- approved spot and stain cleaners, go online to The Carpet and Rug Institute. Test carpet-cleaning products on an inconspicuous area before using. For an appointment please call Choice Care @ 912-354-3067. Savannah Ga.